|
|
SMV-2023-39: Controller for the distance measuring probe
Holá, Miroslava ; Řeřucha, Šimon ; Čížek, Martin ; Pavelka, Jan ; Hucl, Václav
Measurements using a laser interferometer are among the most accurate types of distance measurements. In order to achieve this goal, it is necessary not only to have a precise laser source and an interferometer but also a controller, which ensures the correct recording and reading of the experimental data. The contract research „Controller for a distance measuring probe“ was focused on the realization of such a controller. The controller contains several service modules which ensure correct recording and reading of measured data and several related accessories. It reads and records data from a laser interferometer and also from a module which records atmospheric data necessary for the measured distance determination.
|
|
|
Coherence Controlled Holographic Microscope with the digital optics
Vavřinová, Jana ; Jákl, Petr (referee) ; Dostál, Zbyněk (advisor)
The Digital Micromirror Device (DMD) technology has been developed especially for Digital Light Processing projectors, which allow the image projection. After this succesful implementation, and thanks to the commercial availibility and low initial cost of the DMD chip, a wide range of other applications became possible. Besides, it may be used in microscopy as a spatial light modulator. For example in Coherence-Controlled Holographic Microscope (CCHM) that finds its use especially for imaging and measurement of live-cell dynamic processes. The DMD chip placed in the illumination part of CCHM allows for broadening the application possibilities. Namely it could be different illumination mode experiments or tomographic applications. The master's thesis deals with the optical design of CCHM with digital optics, i. e. DMD chip. The selection of optical elements for CCHM, the experimental verification of the imaging setup and the process of designing the illumination part are described in detail. In the end, the analysis of different designs for illumination setup with the digital optics in object arm is carried out and the results are compared.
|
|
|
Phase imaging below the diffraction limit
Nečesal, Daniel ; Bouchal, Zdeněk (referee) ; Dvořák, Petr (advisor)
Tato diplomová práce se zabývá konstrukcí interferenčních zařízení pro výzkum měření fáze světla na mikro-strukturách a fáze plazmonů na nano-strukturách. V první kapitole je vybudován teoretický základ pro optiku a nano-fotoniku používané v budoucích kapitolách. Následně je popsána interference vln a jejich praktické použití pro prolomení difrakčního limitu pomocí holografie plazmonů. Prvním experimentální sestavou je Machův-Zehnderův holografický mikroskop. Je popsán způsob, jak ho sestavit z běžně dostupných součástek a jak je navržen ovládací software k jeho používání. Následně jsou popsány výsledky naměřené pomocí tohoto zařízení. V poslední kapitole se zaměříme na sestavení holografického SNOM přístroje pro studování plazmonů a jejich interference. Nejdříve popíšeme základní princip a navržení softwaru pro automatizaci měření, pro zrychlení vědeckých postupů. Nakonec předložíme výsledky měření mikroskopu.
|
|
| |
|
|
Polarization Imperfections of Light in Interferometry
Kučera, Petr ; Lazar, Josef (referee) ; Mohr, Fridemann (referee) ; Wilfert, Otakar (advisor)
Disertační práce pojednává o polarizačních nedokonalostech optických komponentů, které jsou využívány ke kontrole a k transformaci polarizačního stavu světla. Získané teoretické výsledky jsou pak využity ve vybraných aplikacích, jež ke své činnosti využívají právě polarizace světla. Konkrétně se jedná o zařízení měřící vibrace oscilujících objektů, dále o interferenční měření dvojlomu v transparentních materiálech a konečně, o vybraná témata z optické kvantové komunikace.
|
|
|
Dynamic laser interferometer
Chovaneček, Libor ; Drexler, Petr (referee) ; Fiala, Pavel (advisor)
The theme of this bachelor´s project is dynamic laser interferometer. The project is firstly focused on theory, where it explains the term of interference and principle of operation of interferometer on specific types of interferometers. Different types of lasers used in interferometers are mentioned there. The next part of this paper is focused on assemblage of interferometer with description of particular parts. There are mentioned two methods of signal processing. The last part deals with confirmation of proper functioning of measuring system.
|
|
|
Review of methods to determining wear in hip replacements
Zapletal, Jakub ; Vrbka, Martin (referee) ; Ranuša, Matúš (advisor)
This bachelor thesis analysis issues of observation and measurement of wear on hip replacements. First of all there is a description of historical milestones in development of hip prosthesis. Afterwards there is a recherché study of measuring methods and devices, whereas each one of them is reviewed for pros and cons. In the last section these methods are compared and there is an author’s recommendation for the most viable method for observation and measurement of wear on hip prosthesis.
|
|
|
Fiber guided illumination module
Kropáč, Vlastimil ; Kvasnica, Lukáš (referee) ; Dostál, Zbyněk (advisor)
This diploma thesis describes the design of the illumination system for a Coherence--Controlled Holographic Microscope (CCHM). The theoretical part mentions the history of microscopy, the principle of holography and individual types of interference microscopy. To get closer to the topic, individual light sources and an overview of current illumination systems are mentioned. The diploma thesis also describes the procedure of designing a fiber-optic illumination module for microscopy from optical design through design of construction to the last step, which is assembly and testing of the module.
|
|
|
Measurement of the piezoelectric charge coefficient
Stehno, David ; Uher, Miroslav (referee) ; Fialka, Jiří (advisor)
The thesis aim was to study in theory the determination of piezoelectric coefficients, in particular piezoelectric coefficient of charge and to use different measurement methods to determine this factor. Also to further study the issue of determining the uncertainties and determine the measurement uncertainty. Measurements were conducted on cylinder-shaped samples, with different dimensions of individual samples. With type material PCM51 and PCM41. Piezoelectric coefficient measurements of charge was carried out using three methods: frequency, direct and quasi-static. The results achieved by all methods are compared at the end of this study and the measurements uncertainty are calculated and discussed for each method.
|
|
|
Application possibilities of refractometer for liquids diagnostics
Macháč, Milan ; Kazelle, Jiří (referee) ; Frk, Martin (advisor)
This bachelor thesis focuses on application possibilities of refractometer for liquids diagnostics. The first part of the thesis focuses on the theoretical basics propagation of electromagnetic waves. The next section focuses on the measurement of refractive index, refractometry, a description of each type refractometers and short introduction to interferometry. The penultimate chapter is devoted to an application using a refractometer and what can measure and calculate. The last chapter is a practical part, there is described a calibration process, the measured values of the refractive index of liquids and evaluate the results.
|
guest ::
